• Engineering Graphics and Design
• Engineering Mechanics
• Mechanical vibrations
• Advanced Strength of Materials
• Strength of Materials
• Applied Mechanics
• Fluid Mechanics and Machinery
• Theory of Machines
• Kinematics and Dynamics of Machinery
• Design of Transmission Systems
• Fluid Mechanics and Machinery Laboratory
• Dynamics Laboratory
• Metrology Laboratory

• Dean(FET) SRMIST – Vadapalani Campus September 2021 Till date
• Principal, St. Peter’s College of College of Engineering & Technology, Avadi, CHENNAI – 600054 18. 08. 2020 to 18.08.2021
• Principal, Agni College of Technology, Thalambur, CHENNAI – 600130 03. 06. 2019 to 16. 12. 2019
• Principal,Sri Sairam Engineering College, CHENNAI – 600044 01. 09. 2008 to 30.03.2019
• Principal, Arulmigu Meenakshi Amman College of Engineering, Vadamavandal – 604 410 24. 01. 2007 to 27. 08. 2008
• Prof. & HOD (Mech. Engg.), Easwari Engineering College, CHENNAI – 600 089 14. 07. 2006 to 23. 01. 2007
• Asst. Prof./ Sr. Lecturer/Lecturer in Mechanical Engineering, Crescent Engineering College, CHENNAI – 48 16. 09. 1988 to 13. 07. 2006
• Associate. Lecturer In Mechanical Engineering Thiagarajar College of Engineering, MADURAI – 15 15. 07.1987 to 06. 05. 1988
• Lecturer in Mechanical Engineering, Arulmigu Kalasalingam College Of Engineering, Krishnankoil – 10. 04. 1987 to 14. 07. 1987

• Conferred with the “Best Principal Award 2017” by SEED (Society for Educational and Entrepreneurship Development), during the 6th Award ceremony held during September 2017 at Chennai.
• Member, Academic Council of Anna University, Chennai, Chennai (Second tenure) for a period of three years wef August 2017
• Conferred with the “Best Academic Administrator” by ASDF (Association of Scientists, Developers and Faculties), a Techno Forum Group during the ASDF Global Awards 2012 held during Dec. 2012 at Pondicherry
• Member, Academic Council of Anna University, Chennai, Chennai for a period of three years wef 17. 07. 2009
• Was the Zonal Coordinator for Zone 6 under Anna University of Technology, Chennai regime
• Was Appointed as Chairman and Member for the Affiliation Inspection Committees by Anna University Chennai and Anna University of Technology Chennai

• Ph.D: Currently guiding one research scholar on Composite Materials
• Postgraduation: Guided not less than two ME students every year in the previous organisations
• Undergraduation: Guided not less than one Project work for BE students every year in the previous organisations

• Engineering Mechanics: Statics and Dynamics (Feb Mar 2018) – 8 Week Course
• Strength of Materials (Jul – Oct 2018) – 12 Week Course
• Developing Soft Skills and Personality (Aug Oct 2018) – 8 Week Course
• Accreditation of Undergraduate Engineering Programmes (2020) – 12 Week Course

Have connectivity with various industries for inplant training, internship and/or project work or consultancy works

• SIEMENS Healthcare
• Trivitron Healthcare Limited
• Rane TRW
• Gestamp Automotives
• Super Auto Forge
• Swing Stetter
• ABE Semiconductors P Ltd.,
• PRAG Robotics
• Paradip Steels P Ltd …. in addition to the Software (IT/ITES) organisations like, TCS, CTS, Wipro, Infosys, Hexaware Technologies, Tech Mahindra, HCL Technologies etc.,

• Analysis of delamination in drilling wood composite medium density fibreboards”,
• Chapter 7 (121-136), in Davim, J.P. (Ed.), Drilling of Composite Materials, NOVA Publishers, New York, 2009 ISBN: 978-1-60741-163-5

• Ramachandran, S., Sindhu J Kumaar and C V Jayakumar, (2020), ”Application of cryptosystem using NSPPL”, BULLETIN MONUMENTAL, (UGG CARE -2), ISSN / e ISSN 0007-743X, Vol. 21, Issue 8, pp.31-36
• Ramachandran, S., Sindhu J Kumaar and C V Jayakumar, (2020), ”Embedded cryptosystem in analytical geometry”, GIS Science Journal (UGG CARE -2), ISSN-1869-9391, Vol. 7, Issue 9, pp.60-65
• Ramu, P., Jayakumar, C. V. and Palanikumar, K., (2019), “Mechanical characteristics and tribological behaviour study on natural fiber nano reinforced polymer composite – A Review” Materials Today Proceedings 16 (2019), Elsevier Science Direct, 2214-7853, pp. 1287 – 1296.
• Ramu, P., Jayakumar, C. V. and Palanikumar, K., (2018 c), “Mechanical properties of cotton fabric / Epoxy based Nano particle composites”, Proc. Int. Conf. Advanced Materials and Manufacturing Processes for Strategic Sectors, Oct. 25-27, 2018, organized by The Indian Institute of Metals, Trivandrum Chapter, INDIA
• Subramanian, T. K., Vinitha, G and Jayakumar, C. V., (2018 b), “Non-linear optical properties of Nano particle C60 Fullerene using Lasers”, J Lasers, Optics & Photonics, Vol. 5, Issue 2, DOI:
• 10.4172/2469-410X, 10018.,
• U, Karunamoorthy. L, Inbanathan. P. V. and Jayakumar. C. V., (2018 a), Micro structural analysis of Cryogenically treated carbon fibre reinforced epoxy laminates and Aluminium, J of Advanced Research in Dynamical & Control Systems, Vol. 10, 01 – Special
• Issue, ISSN 1943-023, pp. 559-565 (Scopus indexed)
• Amjad Basha, Sindhu J Kumaar and Dr. C.V. Jayakumar.,(2017 b) “Learnability of Language Identification Using Antithetical Reply”, in proc. Second IEEE International Conference on
• Computing    and    Communication     Technologies     (ICCCT     ’17).     (Scopus     Indexed; DOI: 10.1109/ICCCT2.2017.7972312)
• Amjad Basha, Sindhu J Kumaar, V. Lavanya and Dr. C.V. Jayakumar (2017 a), “A Computational Model for Monitoring Hexose Monophosphate Shunt Pathway”, Second IEEE International Conference on Computing and Communication Technologies (ICCCT ’17). (Scopus Indexed; DOI: 10.1109/ICCCT2.2017.7972270)
• Jayakumar, C. V., Sai Shankar, B., Pranav, K P. and Kiran Raj, R., (2014), “Rust prevention in structural establishments using vaathodic protection technique driven by an MPPT based solar charge controller”, Proc. International Congress on “Green and Clean Energy”, Bangkok, Thailand.
• Uthayakumar, C., Sarukesi, K., Jose Anand and Jayakumar, C. V., (2009 b), “Impact of Knowledge Management in Global Business”, Proc. International Conf. on Impact of Economic Crisis in Global Business Scenario, Sri Sairam Engineering College, Chennai – 600 044, India, Vol. Human Resources Management, pp. 539-544
• Uthayakumar, C., Sarukesi, K., Jose Anand and Jayakumar, C. V., (2009 a), “Search Engine for Knowledge Management in Higher Education”, Proc. International Conf. on Innovative Computing, Information and Communication Technology’09 ICICT’09, Paper # ICT 412, Sri Sairam Engineering College, Chennai – 600 044, India, Dec 16-18, 2009
• Mamatha, P. N. and Jayakumar, C. V., (2008) “Fatigue fracture of Aluminum metal matrix composites”, Proc. TeamTech 2008 – Tool Engineering, Analysis and Manufacturing Technologies, 22 – 24 Sept 2008, Bangalore, India, Paper # 41
• Velumani, M., Selvam, S., Jayakumar, C. V. and Nasreen Kaleem (2006b), “Design improvements in Carburettor Float”, Proc. National conference on Contemporary Approaches in Design and Manufacturing ’06 (CADAM ’06), Alagappa Chettiar College of Engineering and Technology, Karaikudi – 4.
• Mohan, G., Selvam, S., Jayakumar, C. V. and Nasreen Kaleem (2006a), “Non linear analysis of Carburettor Diaphragm”, Proc. National conference on Contemporary Approaches in Design and Manufacturing ’06 (CADAM ’06), Alagappa Chettiar College of Engineering and Technology, Karaikudi – 4.
• Rajendran, S., Jayakumar, C. V., and Ramamoorthi, K. (2005 b), “Plastic product design, flow analysis and Injection mold design for Air filter cover”, Proc. National conf. On Latest Trends in Mech. Engg.,, Dr. Mahalingam College of Engineering, Pollachi, April 1-2, 2005, pp. 240-247.
• Bharathi, S., Balamurugan, V., and Jayakumar, C. V. (2005 a), “Analysis of Tracked Vehicle Dynamics”, Proc. National conf., Dr. MGR Engineering College, Maduravoyal, Chennai
• Jayakumar, C. V., Sathikh, S., and Jebaraj, C., (2001), “Some additional aspects in the study of bending of helical wire strands with core-wire friction”, Proc. XII ISME Conf., Crescent Engineering College, Chennai – 600 048, Jan. 10-12, 2001, pp. 364-369.
• Sathikh, S., Rajasekaran, S., Jayakumar, C. V., and Jebaraj, C., (2000), “General thin rod model for preslip bending response of strand”, J. Engg. Mech., ASCE, Feb. 2000, Vol. 126, No. 2, pp. 132-139
• Jayakumar, C. V., Sathikh, S., and Jebaraj, C., (1999b), Discussion on: Comparative study of two semi-continuous models for wire strand analysis, J. Engg. Mech., ASCE, March 1999, pp. 369-370
• Jayakumar, C. V., Sathikh, S., and Jebaraj, C., (1999a), “A thin rod model for initial tangent bending stiffness of a helical strand under pure circular bending”, Proc. XI ISME Conf., IIT Delhi, Feb. 3-6, 1999, pp. 432-437
• Sathikh, S., Jayakumar, C. V., and Jebaraj, C., Discussion on: Semicontinuous mathematical model for bending of multilayered wire strands, J. Engg. Mech., Trans. ASCE. (Communicated)
• Jayakumar C.V., Sathikh. S and Jebaraj. C, (1998), “A thin rod general model for initial tangent bending stiffness of a strand”, Proc. National symposium on Dynamics NASDYN 98”, IITM, Chennai (Aug. 1998).
• Jayakumar C.V, Sathikh S, and Jebaraj C. (1997b) “A new microslip model for bending response and hystersis loss of a multiwire strand”, Proc. 1997 ASME Design Engineering Technical Conference, 16th Biennial Conf. On Mechanical Vibrations and Noise, Sacramento, USA (Sept. 1997). Paper No. DETC97/VIB-4075
• Jayakumar C.V., Sathikh. S. and Jebaraj. C., (1997a) “Comparison of bending models of multiwire strand” Proc. 1997 ASME Design Engineering Technical Conference, 16th Biennial Conference on Mechanical Vibrations and Noise, Sacramento, USA (Sept. 1997). DETC97/VIB- 4076
• Sathikh S, Jayakumar C.V. and Jebaraj C., (1996b) Discussion on “A general formulation of theory of wire ropes”, Journal of Applied Mechanics, Trans ASME, Vol. 63, pp 1053-1054 (Dec. 1996).
• Jayakumar C.V, Sathikh S. and Jebaraj C, (1996a) “A new microslip hypothesis for wire-core slip in a strand under bending”, Proc. X ISME Conf. Delhi College of Engg. Delhi (Dec. 1996). pp. I-47 – I-51